Evap Service Port Kit (OBD-II)  

Part # CEA-04
Standard size adapter; connects to most factory-installed fittings and fits EVAP service port standard size.

Part # CEA-042
Fits EVAP service port small size.

Part # CEA-049
Dual-size factory service port Schrader valve removal / installation tool.

Exhaust Cone 
Part # CEA-01

6" in length and tapered from 1" to 3 1/2", the Exhaust Cone is designed for use in diagnosing exhaust system leaks.  Made from EPDM rubber with a neoprene inlet hose, the Exhaust Cone has a 3/8" smoke channel and will fit a wide variety of tailpipe diameters.

Cap Plug Kit
Part # CEA-02

Ranging in sizes  from 1 3/4" to 4 1/2" and 1/8" to 3/16", these accessories are designed to seal a wide range of openings.  Useful for inside and outside diameter openings, each cap plug is made from molded vinyl.

Smoke Diffuser
Part # CEA-03

Made of molded polyvinyl, the smoke diffuser is resistant to chemicals and abrasion.   The Smoke Diffuser slows and concentrates the LeakMaster smoke for use in diagnosing wind and water leaks in vehicle passenger compartments.

Spotlight
Part # HS400-20AC

This heavy duty 400,000 candle power halogen spotlight makes seeing the exiting smoke even easier to see. 

This 25' coiled hose is used to deliver inert gas, such as nitrogen, to the LeakMaster 6525.  Connect the 1/4 pipe-thread to the nitrogen regulator and the quick-disconnect fitting to the LeakMaster 6525.

Twelve LEDs produce hi-intensity true UV light. Includes battery charger and UV enhancing glasses.  

Included with:
• None

You don’t need to manually adjust gas flow with this 100 PSI Pre-set Pressure Regulator.   The regulator assures you have correct, safe operating pressure every time. It connects quickly and easily to our coiled hose (Part No. CEA-041) and any standard nitrogen tank.

Included with:
• None

• Recessed area on top of cart allows smoke machine to fit tightly and ensures its safety from tipping.
• Holding well for a standard sided SAE nitrogen tank of 60 (Q) or 75 (S) cubic foot.
• Two large shelf areas for storing accessories that come with the tester.